HARUE DAVINCI · CERAMIC OVERLAY

Preserving the tooth that remains
Ceramic overlays to restore the chewing surface

We assess molar chewing surfaces damaged by decay, fracture or wear.
Using the tooth structure that can be retained, we cover and restore the necessary area with ceramic.

01 · What is a ceramic overlay?

A partial restoration covering a broadly damaged chewing surface

A ceramic overlay is a partial restoration that broadly covers a damaged or worn chewing surface. When the remaining tooth and bonding conditions are suitable, it can restore the area needed while preserving the sides of the tooth.

Coverage is determined by the extent of decay, fracture and wear, the thickness of the remaining tooth and the bite. After removing decay, we design the ceramic around the remaining shape and the conditions needed for bonding.

We consider tooth preservation and restoration stability together. Preparation and the amount of tooth reduction vary with the tooth and material; the same method is not suitable for every tooth.

02 · Inlays, onlays, overlays and crowns

Check how much of your tooth will be covered

InlayDamage within the tooth
OnlayExtending over some cusps
OverlayCovering all cusps
CrownWrapping around the tooth
General distinctions to help explain differences in coverage.
Type Area usually restored Points considered in planning
Inlay A restoration filling damaged areas within the tooth Whether surrounding walls and cusps can be preserved
Onlay A restoration covering damage and some cusps Whether weakened or fractured cusps need protective coverage
Overlay A restoration covering all cusps of the chewing surface Broad chewing-surface damage, remaining sides and bonding conditions
Crown A restoration wrapping around the tooth Whether circumferential coverage is needed and how much structure remains

The raised chewing points are called cusps. Terms and distinctions can vary with coverage, so we explain which parts of your tooth will be retained and covered.

Read about all-ceramic crowns →

03 · Suitable situations

Which molars may be considered?

Broad wear of the chewing surface

When wear has affected shape or height, we assess the remaining tooth and the bite.

A weakened chewing surface after decay removal

We check wall and cusp thickness after removing decay to decide whether coverage is needed.

Replacing large fillings or existing inlays

We assess the old restoration and surrounding damage to decide which areas can be retained and which need restoring.

Fracture of a cusp

We assess fracture depth, crack extent, pulp condition and remaining structure to determine whether a partial restoration is possible.

We also check whether enough side-wall and bonding structure remain, whether the area can be kept dry, and whether it can withstand chewing forces.

With extensive damage, deep fractures or lesions in locations difficult to bond, a crown or another treatment may be more appropriate. The plan is determined after diagnosis.

04 · Planning treatment for worn teeth

Tooth height and the whole bite are assessed together

When several teeth are worn, we assess the overall bite and causes of wear as well as each tooth’s shape. Grinding, clenching, acidic conditions and lifestyle habits also inform the plan.

When restoring height lost through wear, we check available space, jaw movements and adaptation. Cause management and regular bite checks continue after treatment.

Learn about treatment for severely worn teeth →

05 · The Harue Da Vinci treatment process

Coverage designed around the remaining tooth

Dr. Hanna Lee personally carries out diagnosis, design and fabrication. Our in-house digital system helps plan tooth shape and chewing surfaces, and we check the bite after bonding.

  1. Diagnosis and bite analysis

    We assess decay, fracture, wear, remaining tooth and bite, then explain partial-restoration options and alternatives.

  2. Removing decay and old restorations; preparing the tooth

    We remove what is necessary, identify the tooth to preserve and the area to cover, and shape it for the material and bonding requirements.

  3. Intraoral scan

    We record the remaining tooth shape, bite and other information needed for fabrication.

  4. Design and fabrication

    We plan thickness, coverage, contacts between teeth and the chewing surface, then make the ceramic restoration.

  5. Try-in and bonding

    We check fit, shape and contacts, then bond the restoration with appropriate moisture control and bonding steps.

  6. Bite adjustment and care guidance

    We check contacts during chewing and jaw movement, make necessary adjustments, and explain care and follow-up.

With suitable teeth, gums and fabrication conditions, same-day fabrication and bonding may be possible. Preliminary treatment may require more time and visits, and regular checks continue afterward.

See fabrication at Harue Smile Lab →

07 · Care after treatment

Regular checks of bonded margins and chewing surfaces

Continue daily brushing and suitable interdental care such as floss or interdental brushes. At check-ups, we assess restoration margins, gums, decay and bite.

Avoid biting ice or hard objects. If you grind or clench, discuss whether a protective appliance is needed. Seek care for sensitivity, pain, fracture, debonding or bite discomfort.

Maintenance centre guide →

08 · Time and fees

Explained according to the restoration extent and process needed

We explain time and fees after checking the number of teeth, damage, preliminary treatment and fabrication requirements. Confirm any additional treatment and what the fee includes before starting.

Reference fees are available in the common fee guide. The item relevant to your overlay treatment and the final fee are explained after diagnosis.

View reference treatment fees →

09 · Frequently asked questions

Questions about ceramic overlays

Do I need a crown or an overlay?

The choice depends on the amount and location of remaining tooth, damage and cracks, bonding conditions and bite. A partial restoration may be considered when enough side structure remains; a crown may be considered when the tooth needs circumferential coverage.

Does an overlay require tooth reduction?

Reduction may be needed to remove decay and weak structure and provide ceramic thickness and bonding conditions. Even when adding shape to worn teeth, the adjustments needed are decided after diagnosis. Removed tooth tissue does not regrow.

Can it be used on a root-treated molar?

Sometimes, but not for every tooth. We assess remaining walls and tissue, cracks, bonding and chewing forces to choose a partial restoration, crown or another suitable approach.

Can I have an overlay if I grind my teeth?

We assess grinding severity, the bite, remaining tooth and fracture risk together. Habit management or a protective appliance may be needed alongside treatment, with regular checks afterward.

Can a bonded overlay come off or break?

Debonding or fracture can occur depending on bonding conditions, chewing forces, tooth condition and habits. A fixed lifespan cannot be guaranteed. If something feels wrong, seek dental care rather than trying to glue it yourself.

Discuss the restoration coverage suited to your molar

We assess the remaining tooth and bite together and explain the treatment and schedule needed.

Clinical care and design: Dr. Hanna Lee